" LAKSHYA" 10th Class Special Action Plan
for all Subjects
@ TELUGU
@ HINDI
@ ENGLISH
DOs & DON'Ts HANDLING OF EVMs AND VVPATs AT VARIOUS POINTS
@ DOs:
DURING DISPERSAL :
1. Do not forget to ensure that the EVM & VVPAT is related to the particular polling station for which it has been allotted.
2. Do not take away any EVM & VVPAT units to any unauthorized place like residence, market etc.
3. Do not repeatedly switch ON and OFF the VVPAT machine as it will deplete the battery as well as paper roll, causing problems during the Poll process.
4. Do not forget to switch OFF the Control Unit while connecting or disconnecting the EVM units and VVPAT.
5. Do not pull the cable of Ballot Unit & VVPAT machines while disconnecting from the Control Unit.
6. Do not switch on the VVPAT at time of Dispersal.
7. Do not connect Ballot Unit, Control Unit and VVPAT machine during dispersal.
8. Do not keep VVPAT knob vertical i.e. in working mode while transporting.
9. Do not stay at any place other than designated place. 10.Do not remove any seal from BU, CU and VVPAT.
11.Do not use vehicle other than provided by RO at the time of dispersal and return.
DURING MOCK POLL
1. Don't start mock poll, if no or one election agent is present. Wait for 15 minutes.
2. Don't stop mock poll without casting at least 50 votes.
3. Don't keep BU, CU and VVPAT on one table for mock poll. Keep BU & VVPAT at voting compartment.
4. Don't forget to cast at least one vote to each candidate button including NOTA during mock poll.
5. Don't leave any mock poll slip inside the VVPAT slip compartment after completion of mock poll on poll day.
6. Don't forget to delete mock poll data from the CU before starting of actual poll.
7. Don't keep mock poll VVPAT slips unstamped in black envelope.
8. Don't forget to tally EVM count with VVPAT slips count during mock poll.
9. Don't forget to fill Mock Poll Certificate in Part-I of Presiding Officer Reports.
10. Don't start actual poll without sealing Result Section of CU and Drop Box of VVPAT and taking signatures of polling agents.
@ .DON'Ts
1. Don't Switch ON the Control Unit at the time of connection and disconnection of Ballot Unit, Control Unit and VVPAT.
2. Don't forget to clear mock poll data from the Control Unit and VVPAT mock slips from VVPAT in mock poll process.
3. Don't hang any high illumination bulb over VVPAT at Voting Compartment.
4. Don't forget to tape the interconnecting cable of BU or VVPAT to the leg of the table with "Transparent" adhesive tape.
5. Don't Switch OFF or Switch ON EVM during poll process.
6. Don't Switch ON Control Unit when VVPAT paper roll knob is in lock position, i.e. horizontal position.
7. Don't operate the paper roll knob till the end of the poll.
8. Don't forget to press both side latches of connector while disconnecting the cable.
9. Don't enter into the voting compartment to educate illiterate voter how to cast vote. Use cardboard BU for this purpose.
10. Don't conduct mock poll in case of replacement of only VVPAT during the actual poll.
11. Don't forget pressing of close button of CU after completion of poll.
12. Don't forget to remove VVPAT Power Pack from VVPAT before sealing of VVPAT in its carrying case after completion of poll.
13.13. Don't forget to tally votes by pressing total Button on CU with 17-A, when 17-C is prepared, at the end of Poll.
DOs & DON'Ts in Special Cases
@ Dos:
1. Any elector arriving at polling station to cast his vote who is either blind or physicallyinfirmorcannotseesymbolbuttononBU,willbeallowedtovotewith the help of companion. Provide Braille ballot paper to blind/visually impaired voters, if he/she desires.
2. Before a person is allowed to act as companion, he/she must give a declaration in prescribed format and indelible ink will be applied on the middle finger of Right Hand. If right hand has already been marked with indelible ink, he shall not be permitted to act as a companion.
3. Ifnameofelectorcomingforvoting,isfoundinASDList,bythePOidentifyingthe electors, he/she will be requested go to PRO, who will complete his identification.
4. If an elector is carrying unofficial identity slip containing name of Contesting Candidate and/party and/Symbol, then instruct concerned polling agent to end such violation.
5. Incaseofilliteratevoter,the1stPollingOfficershouldreadoutserialnumberof elector and ask elector to tell him/ her name to ascertain genuineness.
6. Iftheelectorisnotabletoestablishhisidentityandfoundimpersonatinginplace of another elector, the person should behanded over to the police with letter of complaint to S.H.O. in prescribed format of PRO Handbook.
7. 7.IfduringtheidentificationandmarkingofelectorsinmarkedcopyofElectoral Rolls, it comes to the notice that Vote of elector has already been cast, such elector, if found genuine, will be allowed to cast his/her voter through Tendered Ballot Paper, not through the vote in EVM.
@ DON'Ts
1. Do not force any elector to vote if he decides not to vote.
2. Do not allow any polling official to cast his vote in the PS unless they have been issued an EDC or PB as case may be.
3. No person shall be permitted to act as a companion of more than one elector at any polling station on the same day.
4. If right hand middle finger of authorized companion is already marked with indelible ink, such person not to be allowed to act as authorized companion for the concerned elector.
5. Cases where an authorized companion merely led up to the voting compartment (but did not enter), shall not be included in Form 14A.
6. Nopollingstaffshouldactasacompaniontoablindelectortocastvoteonhis behalf.
7. Noauthorizedcompanionshouldbeallowedtostayinsidetheboothafterthe elector has voted.
8. For “Challenged votes”-Do not entertain a challenge to an elector’s identity, unless the concerned polling agent depositsRs.2/- in cash.
9. Do not press or compel an elector to vote if he decides not to vote after his particulars have been noted in the Register of Voters. Make an entry to that effect in the 'Remarks' column against the entry relating to that elector in the Register of voters.
10. If you consider an elector to be much below the voting age, i.e., 18 years but are other wise satisfied about his identity, obtain a declaration from him about his age. Do not question his eligibility.
11. Do not change any serial number in column1of the Register of voters, because of any elector who decides not to vote.
12. DonotallowelectorwhohascometoPSaftersomeoneelsehasalreadyvotedin his name to vote by voting machine but use tendered ballot paper.
13. Do not allow an elector to vote if he refuses to follow the prescribed voting procedure to maintain secrecy of voting after being warned by you.
DOs& DON'Ts SEALING OF EVM AND VVPAT AFTER THE CLOSE OF POLL
@ Dos :
1. Switch off the power in the Control Unit before disconnecting the Ballot Unit(s), the Control Unit and VVPAT.
2. Ensuret hat the power pack of VVPAT has been removed; paper slips contained in the drop box of the VVPAT are intact and the Ballot Unit(s), the Control Unit and VVPAT put back in their respective carrying cases.
3. Ensure that each carrying case is sealed at both ends by passing a thread through the two holes provided for the purpose on both sides of the carrying case and puttingthreadsealwithanaddresstagshowingtheparticularsoftheelection,the PS and the unit contained therein and carrying the signature of Presiding Officer with date and seal on it.
4. Ensurethatthecandidatesortheirpollingagentsarepresentanddesirousof putting their seals shall also be allowed to do so.
5. Ensure that the names of the candidates/polling agents who have affixed their seals on the carrying case of the Ballot Unit(s) and Control Unit are noted in the declaration which PRO makes at the close of the poll.
@ DON'Ts
1. Do not use any Proforma for the PRO diary other than the one furnished.
2. Do not forget to put correct Address tag on the EVMs and VVPATs at the time of sealing.
3. Do not put wax on the EVMs, VVPATs and their carrying cases at the time of sealing.
@ Dos :
1. Close the poll at the appointed hour even if it has started late. Give numbered slips with Presiding Officer’s signature only to those electors who are in the queue at this hour starting with the last person in the queue.
2. Ensure that no additional person joined the queue after the appointed hour.
3. Ensure that after the last voter has voted as per the above procedure, the ‘CLOSE’ button is pressed on the Control Unit and Part-III of Presiding Officer’s Reports has been prepared.
4. Note the total number of votes recorded in the CU in Item 6 of Part I of Form17C.
5. At the time of closure of poll, make a note of the Poll end date and time, displayed on the CU in the Presiding Officer’s diary.
6. Switch off CU and then disconnect the BU(s) from VVPAT and VVPAT from the Control Unit.
7. Remove VVPAT Power pack in the presence of Polling Agents.
8. After the close of poll, prepare under Rule 49S, an account of votes recorded in the CU (Such account shall be prepared in Part-I of Form-17C in duplicate and copy thereof should be given to each Polling Agent.)
@ DON'Ts
1. Do not forget to make a declaration at the close of poll in Part III (Annexure- 6) under rule 49S regarding furnishing of copies of account of votes recorded, to the polling agents.
2. Don’t forget to remove VVPAT Power Pack (Battery) from VVPAT before sealing of VVPAT in its carrying case after completion of poll.
3. Do not forget to make a Presiding officer Reports at the close of poll in part IV & V in case of replacement of EVM during Mock poll or during Actual Poll as the case may be.
4. Don’t forget to press the close button on CU at the close of poll.
5. Don’t forget to intimate the SO/RO about the close of poll.
1. Ensure that the polling starts at the scheduled time.
2. Explain to all present, the provisions of section 128 of the Representation of the People Act, 1951 regarding maintenance of secrecy of voting and warn them of the penalty for any breach.
3. Read out the declaration as per instruction in prescribed Format.
4. Take appropriate precautions regarding handling of indelible ink.
5. Maintain visitor sheet and make entries of visitors as prescribed by the Commission.
6. Intimate the status of commencement of poll to the Returning Officer through your sector officer.
7. Before the first voter signs in Form 17A (Register of Voters), the Polling Officer 1 shall check with the Presiding Officer and record in INK in Form 17A that “Total in the Control Unit checked and found to be Zero”.
8. At regular intervals, check the Ballot Unit(s) and VVPAT to ensure that the voter has not tampered with it in any manner.
9. Check periodically the ‘TOTAL’ for each Control Unit by pressing TOTAL button on CU to ensure that the voting is going as per the serial order of electors (Total should match with voter register i.e., Form 17A last serial number).
10. Collect statistical information for compilation of items of Presiding Officer’s diary regarding polling at every two hours and sending it to RO through the specified channels.
11. If any voter wants to know how to vote on EVM, explain him with the dummy Ballot Sheet.
@ DON'Ts
1. Do not enter the voting compartment in the absence of polling agents.
2. Do not enter the voting compartment at the time of polling to explain to the illiterate voters about how to use EVM and cast their vote. Use Cardboard dummy BU for this purpose.
3. PRO or other staff should not go frequently in the voting compartment, as that may give scope for complaints.
4. Don’t operate the paper roll knob on VVPAT till the end of the poll.
5. Don’t conduct mock poll in case of replacement of only VVPAT during the actual poll. In case of replacement of entire set during poll, Mock Poll will be conducted by casting only one vote to each candidate including NOTA.
6. In case of replacement of entire set during poll don’t forget to clear mock poll data from the Control Unit and VVPAT mock slips from VVPAT in mock poll process.
7. Don’t hang any high illumination bulb over VVPAT at Voting Compartment
8. Don’t Switch ON the Control Unit at the time of connection and disconnection of Ballot Unit, Control Unit and VVPAT.
9. Don’t forget to tape the interconnecting cable of BU/VVPAT to the leg of the table with ‘transparent’ adhesive tape.
10. Don’t forget to press both side latches of connector while disconnecting the cable.
11. Don’t Switch OFF/Switch ON EVM during poll process
12. Don’t forget pressing of close button of CU after completion of poll.
DO's & DONT's During the Mock Poll
@ Dos :
1. Do go through the meaning of various displays which appear on the Display panel of the control unit.
2. Mock poll proceedings have to be video graphed, by authorized videographer, if directed.
3. For mock poll, the Ballot Unit and VVPAT should be placed in the voting compartment, where a Polling Officer should be present along with polling agents to observe operations on BU and paper slips printed on VVPAT.
4. Put paper roll locks on VVPAT in vertical position after inter connection of BU, CU and VVPAT.
5. At least 50 votes should be cast during Mock poll in the presence of Candidates/Agents.
6. Manual record of votes casted should be maintained by the Polling Officer.
7. Mock poll should be conducted with the polling agents voting at random for each of the contesting candidates including NOTA.
8. Ascertain the mock poll result from Control Unit and compare with Manual record of votes.
9. Remove the mock poll print paper slips from VVPAT drop box and Count the VVPAT printed paper slips in the presence of the polling agents and confirm that the results tally for each candidate.
10. Press the ‘Clear’ button of Control Unit before the actual poll to clear the account of votes recorded during the mock poll.
11. Empty drop box must be verified by the polling agents.
12. Follow the procedure for sealing and storage of Mock Poll VVPAT paper slips.
13. 13. Seal the drop box of VVPAT with the thread and an address tag using Presiding Officer’s seal before the actual poll starts and obtain signatures of Polling Agents thereon.
14. 14.Seal the Result section of the control unit with green paper seal, special tag and address tag, and obtain signatures of polling agents.
15. 15.Prepare Part-I of the Presiding Officer’s Reports (Mock poll certificate) and obtain signatures of Polling Agents thereon.
16. 16.Take the signatures of other polling officers in the Part-I of Presiding Officer’s Reports that mock poll votes are erased from the CU and mock poll VVPAT slips are removed from the VVPAT drop box before start of actual poll.
17. 17.At the end of Mock Poll at the PS, check and note the date and time shown in the display of the Control Unit and also the actual date and time as well as any discrepancy between the two, if any, mention it in the Mock Poll certificate and also in Presiding Officer’s Diary.
18. After completion of mock poll intimate the mock poll status to returning officer through your sector officer.
19. Micro Observer, if appointed, must have participated in all the proceeding of the mock poll and his signature has to be obtained on Part-I the Presiding Officer’s Reports (Mock poll certificate).
@ DON'Ts :
1. Don’t start mock poll, if no or only one election agent is present. Wait for 15 minutes.
2. Don’t stop mock poll without casting at least 50 votes.
3. Don’t forget to cast at least one vote to each candidate button including NOTA during mock poll.
4. Don’t keep BU, CU and VVPAT on one table for mock poll. (Keep BU & VVPAT at Voting Compartment).
5. Do not seal rear compartment of Control Unit with WAX.
6. Don’t leave any mock poll slips inside the VVPAT slips compartment after completion of mock poll on poll day.
7. Don’t keep mock poll VVPAT slips unstamped in black envelop.
8. Don’t forget to tally EVM count with VVPAT slips count during mock poll.
9. Don’t forget to fill Mock Poll Certificate (Part-I of Presiding Officer Reports) and take signatures of polling agents.
10. Don’t forget to CLEAR mock poll data from the CU before starting of actual poll. 11.Don’t start actual poll without sealing Result Section of CU and Drop Box of VVPAT and taking signatures of polling agents.
ARRANGEMENTS AT POLLING STATION
@ Dos :
1. All members of polling party and security personnel must be present at the Polling Station.
2. Ensure that there is enough space for the voters to wait outside the Polling Station and form separate queues for male and female voters, senior citizens and pregnant women.
3. Do ensure special arrangements for identification and application of indelible ink to Pardanas in women electors if required.
4. Ensure separate entry and exit for voters.
5. Do place the Ballot Unit(s) and VVPAT in voting compartment in such a way that no one can disturb the interconnecting cable, and the cable is fully visible and its routing does not obstruct the movement of voters inside the Polling Station.
6. Put the VVPAT lock-unlock switch for paper roll in working-vertical position before switching on the Control Unit.
7. To Maintain the secrecy of the ballot, ensure that polling officers and agents are seated in such a way that the BU, VVPAT and the voter recording his vote by pressing button on BU, is not visible to them at all.
8. Ensure three separate quees for PWD/Senior citizens, male and female elector.
9. Check the appointment letters of polling agents and explain to them the provisions of section 128 of the R.P. Act 1951. Issue them entry passes for their movement.
10. Ensure that Polling Agents appointed at the Polling Station are enrolled in the voter list of that Assembly Constituency and have EPIC or any other government approved Photo Identity Card.
11. Ensure the following:
a) A notice specifying the polling area and particulars of electors to be served by Polling Station is displayed outside the Polling Booth.
b) A copy of list of the contesting candidates in Form 7A is displayed outside the Polling Station prominently.
c) Voter Facilitation Posters and instructions are displayed on the outer wall, near the entrance of the Polling Booth.
12. A HELP DESK/ Voter Assistance Booth must be set up by BLO to provide necessary assistance to the electors.
13. Ensure that all security personnel deployed at your polling station are present.
@ DON'Ts:
1. Do not accept the hospitality of any Contesting Candidate, Political parties and local people etc
2. No cooking or lighting of fire for any purpose should be allowed inside the PS.
3. No smoking is allowed inside the PS.
4. No arms should be carried inside the PS.
5. Do not allow mobile phone inside the booth and even the cell phones of polling personnel should remain switched off/ in silent mode inside the polling booth.
6. Do not have high wattage incandescent bulbs/tube-light placed directly over or in front of the VVPAT and also no window must be opened behind EVM and VVPAT.
7. Do not expose the EVM and VVPAT to web camera/video camera so as to maintain secrecy of voting.
8. Do not appoint any person as polling officer (in unforeseen situation where polling officer cannot do his duties) who is connected to the candidate or party.
9. Don’t have any photograph of any leader or symbol of political party or slogans related to elections displayed in the PS
10. No campaign material to be displayed in and around the booth and area of 100mts around the PS.
11. No political party agent should be seated in such a way inside the booth that they have a chance to see a voter recording his/her vote.
12. No political party member other than authorized person to be allowed to sit inside the PS or within a radius of 200m around it.
13. Do not allow any photographer/ person to take pictures of a voter casting his/her vote in the voting compartment.
14. Do not allow any person other than voter and those authorities allowed by ECI to enter the polling booth.
15. No person should be allowed within the PS or within 100 mtrs. there of to wear badges, emblems etc. bearing the names of candidates or political leaders and or their symbols or pictorial representation of any kind as it may amount to campaigning.
16. Do not allow the security personnel posted at the entrance of PS to verify the identity of electors as it is the duty of the polling personnel.
17. No security jawan should be positioned inside the polling booth.
18. Do not give any special treatment to any VIP or celebrity coming to cast vote.
Covers details
Statutory covers 5 Green Colour
1. Marked copy of the eloctoral roll
2. Register of voters
3. Voters slips
4. Unused tender ballot papers
5. Used tender ballots 17B
Non statutory covers 11 Yellow colour
1. Electoral roll
2. Appointment letters of polling agents form10
3. Election duty certificate
4. List of challenged votes
5. Declaraion of companions
6. List of such electors
7. Reciet book of challenged votes
8. Unused damaged paper seals
9. Unused voter slips
10. Unused damaged special tags
11. Unused damaged strip seals
Third pocket 7 Brown colour pockets
1. PO handbook
2. Vvpat manual
3. Indelible ink set
4. Self inking pads
5. Metal సీల్
6. Cross mark rubber stamp
7. Cup
Fourth pocket1 Brown colur pocket big
1. All the remaining items
@ Training film on " EVM & VVPAT "
@ Search your name in Electoral Roll
@ Form No: 12 - Application for Postal Ballot
@ Remuneration to Poling Personal on Election Duty
@ Election Process Points ( 120 Questions & Answers )
@ Hand Book for Presiding Officer 2023
@ Check List for Presiding Officers
@ DOs & DON'Ts for Presiding Officer
@ Election Traning Video Films
@ End of Poll - Submission of Covers to Returning Officer
@ DOs & DON'Ts HANDLING OF EVMs AND VVPATs AT VARIOUS POINTS
@ DOs & DON'Ts in Special Cases
@ DOs & DON'Ts SEALING OF EVM AND VVPAT AFTER THE CLOSE OF POLL
@ DO's & DON'Ts Closing of the Poll
@ DOs & DON'Ts Commencement During the Poll
@ DO's & DONT's During the Mock Poll
@ DO's & DON'Ts ARRANGEMENTS AT POLLING STATION
@ DO's & DON'Ts At Dispatch Center
@ Elections Training Info in Telugu ( Complete Details )
@ On Poling Day - Step by Step Process Details in Telugu
@ Male and Female Votes Tally Sheet
@ Election Attendance Certificate
SSA Grants 2022-23 Audit Software & Formats
* SSA AUDIT SOFTWARE FOR FY 2022-23 (as per PFMS) - Medak Badi
* CRC ( School Complex ) 2022-23 Audit Form
* URS & URH 2022-23 Audit Form
Concept of 10 Bagless Days
1 నుండి 10 తరగతుల విద్యార్థులందరూ 10-బ్యాగ్లెస్ డేస్లో పాల్గొంటారు. పిల్లలు పాఠశాల లోపల మరియు వెలుపల ఇండోర్ మరియు అవుట్డోర్ కార్యకలాపాలకు ఎప్పటికప్పుడు బహిర్గతం చేయబడతారు.
@ ఇందులో క్విజ్లు, డూడ్లింగ్, ప్రయోగాలు, చారిత్రక, సాంస్కృతిక మరియు పర్యాటక ప్రాముఖ్యత ఉన్న ప్రదేశాలు/స్మారక చిహ్నాల సందర్శనలు, స్థానిక కళాకారులు మరియు కళాకారులను కలుసుకోవడం మరియు రాష్ట్రాలు మరియు స్థానిక సంఘాలు నిర్ణయించిన విధంగా వారి గ్రామం/ మండలం/జిల్లా/ రాష్ట్రంలోని ఉన్నత విద్యాసంస్థల సందర్శనలు ఉంటాయి.
@ స్కూల్ బ్యాగ్ పాలసీ 2020 ప్రకారం, విద్యార్థులు సంవత్సరంలో 10 రోజులు బ్యాగ్ లేకుండా పాఠశాలకు వెళ్లాలని సిఫార్సు చేయబడింది. విద్యార్థులపై ఎలాంటి ఒత్తిడి లేకుండా స్కూల్ బ్యాగ్ భారం తగ్గించడంలో భాగంగా దీన్ని అమలు చేయనున్నారు.
10 బ్యాగ్లెస్ డేస్ లక్ష్యాలు :
@ 10 బ్యాగ్లెస్ డేస్ యొక్క సాధారణ లక్ష్యం పిల్లలు ఆనందకరమైన అభ్యాసాన్ని సరదాగా అనుభవించేలా చేయడం
@ పరిశీలన-ఆధారిత అభ్యాస సామర్థ్యం మరియు అభ్యాసం కోసం పరిధిని నిర్మించడం. కమ్యూనిటీ మరియు పరస్పర ఆధారపడటం యొక్క అనుసంధానం గురించి అవగాహనను అభివృద్ధి చేయండి.
@ సైద్ధాంతిక మరియు ఆచరణాత్మక అనువర్తనంతో తరగతి గది పరస్పర ఆధారపడటం. వడ్రంగి, ఎలక్ట్రికల్ పని, తోటపని, కుండలు మొదలైన వాటితో పని చేయడం మరియు ఇప్పటికే ఉన్న స్థానిక వృత్తుల ద్వారా కార్మికుల గౌరవాన్ని ప్రోత్సహించడం. సాధ్యమయ్యే వృత్తి మరియు ఉన్నత విద్య మార్గాలను బహిర్గతం చేయడానికి.
వార్షిక పని ప్రణాళికను అభివృద్ధి చేయడం :
ప్రతి పాఠశాల పాఠశాలలో కార్యకలాపాలను సరిగ్గా అమలు చేయడానికి ఇండోర్ మరియు అవుట్డోర్ కార్యకలాపాల వార్షిక కార్య ప్రణాళికను సిద్ధం చేయాలి. పాఠశాల వార్షిక పని ప్రణాళికను సిద్ధం చేస్తున్నప్పుడు, కింది అంశాలు మార్గదర్శకాలుగా పనిచేస్తాయి:
i) వార్షిక పని ప్రణాళికను అభివృద్ధి చేస్తున్నప్పుడు, సబ్జెక్ట్ ఉపాధ్యాయులందరూ పాల్గొంటారు.
ii) అవసరమైతే, ఇండోర్ మరియు అవుట్డోర్ యాక్టివిటీస్ను ఒక రోజులో క్లబ్బ్ చేయవచ్చు
ప్రీ-యాక్టివిటీ: టీచర్ కార్యకలాపాలకు ముందు నిర్వహించాల్సిన ముందస్తు కార్యకలాపాలను ప్లాన్ చేస్తారు. ఇది ఉపాధ్యాయులు మరియు విద్యార్థులు కార్యకలాపాలను నిర్వహించడానికి తమను తాము సిద్ధం చేసుకోవడానికి సహాయపడుతుంది.
పోస్ట్ యాక్టివిటీ: యాక్టివిటీల తర్వాత, టీచర్ విద్యార్థులతో కలిసి యాక్టివిటీల మొత్తం రిపోర్టును సిద్ధం చేయవచ్చు.
వార్షిక పని ప్రణాళికను అభివృద్ధి చేయడానికి సూచనాత్మక ఆకృతిని పరిశీలించడం మరియు ఉపయోగించడం కోసం క్రింద ఇవ్వబడింది. వార్షిక పని ప్రణాళికను సిద్ధం చేస్తున్నప్పుడు, కోరుకున్నట్లు మార్పులు చేయవచ్చు.
NO బ్యాగ్ డే కార్యకలాపాలు :
*మ్యూజియంలు, చారిత్రక ప్రదేశాలు, గ్రామ పంచాయతీల వంటి కార్యాలయాల సందర్శన,
*సైన్స్ ప్రయోగాలు,
*బాలికా విద్యపై స్కిట్లు,
*గాలిపటాల తయారీ,
*కృత్రిమ మేధస్సు,
*గణిత మూల,
*గణిత రంగోలి,
*మోడల్ ఎన్నికలు,
*మాక్ అసెంబ్లీ,
*ఆర్థిక లావాదేవీల నిర్వహణ,
ఇకపై రాష్ట్రంలోని అన్ని రకాల పాఠశాలల్లో యాక్టివిటీ బేస్డ్ లెర్నింగ్ తప్పనిసరి అవుతుంది.
ప్రాథమిక పాటశాల కార్యకలాపాలు :
ప్రైమరీ విభాగానికి షో టైమ్, ఫన్ స్టేషన్ మరియు క్రియేటివ్ సర్కిల్ అనే మూడు సెషన్లు ఉంటాయి. క్లాస్ I మరియు II విద్యార్థులు కమ్యూనికేషన్ స్కిల్స్ మరియు సృజనాత్మకతను పెంపొందించుకునే ఈ సెషన్లలో భాగంగా వారి కుటుంబం గురించి మాట్లాడమని, కుటుంబ సభ్యులలో ఒకరిని అనుకరించాలని మరియు కుటుంబ సభ్యుల స్కెచ్ను గీయమని అడగబడతారు.
క్లాస్ III, IV మరియు V విద్యార్థుల కోసం కార్యాచరణ-ఆధారిత అభ్యాసంలో భాగంగా, జీవనోపాధిపై ఒక థీమ్ రూపొందించబడింది, ఇక్కడ వారు వృత్తిలో ఉపయోగించే సాధనాలను గీయడంతోపాటు వారు ఇష్టపడే వృత్తిపై మాట్లాడటానికి మరియు నటించమని అడగబడతారు.
సెకండరీ స్థాయి కార్యకలాపాలు:
సెకండరీ స్థాయి (6 నుండి 10వ తరగతి) విద్యార్థులకు, కుటుంబ బడ్జెట్ సర్వేతో పాటుగా పోస్ట్ ఆఫీస్, నిర్మాణ స్థలాలు, రేషన్ షాపుల సందర్శనతో సహా ఫీల్డ్ విజిట్లు, మోడల్ అసెంబ్లీ మోడల్ ఎన్నికలు మరియు ఆర్థిక లావాదేవీలు బాహ్య మరియు ఇండోర్ కార్యకలాపాలలో ఉన్నాయి. అనుభవపూర్వకమైన అభ్యాసంలో భాగం చేసింది. మొత్తం మీద, వారి కోసం 28 కార్యాచరణ-ఆధారిత అభ్యాస భావనలు ఉన్నాయి.
ఈ చొరవ ప్రధానంగా సైద్ధాంతిక పరిజ్ఞానం మరియు ఆచరణాత్మక అనువర్తనం మధ్య అంతరాన్ని తగ్గించడం లక్ష్యంగా పెట్టుకుంది, అదే సమయంలో విద్యార్థులను వివిధ పని నైపుణ్యాలను బహిర్గతం చేయడం, వారి భవిష్యత్ కెరీర్లపై సమాచారం తీసుకునే నిర్ణయాలు తీసుకోవడానికి వీలు కల్పించే అంతర్దృష్టులను పొందడంలో వారికి సహాయపడుతుంది.
నో బ్యాగ్ డే హ్యాండ్అవుట్ :
SCERT ఒక ప్రత్యేక పుస్తకాన్ని ముద్రించింది, అంటే, ప్రతి నాల్గవ శనివారం ఎలాంటి కార్యకలాపాలు చేయాలో సూచించే నో బ్యాగ్ డే హ్యాండ్అవుట్ ఈ పుస్తకం 1 నుండి 10వ తరగతి విద్యార్థులందరి కోసం రూపొందించబడింది. ఇందులో 28 రకాల కార్యకలాపాలు ఉన్నాయి మరియు వారి సామర్థ్యాన్ని బట్టి వాటిని ఉపయోగించుకునే అవకాశం ఇవ్వబడింది.
@ ఈ పుస్తకం అన్ని ముఖ్యమైన అంశాలను మరియు 10 బ్యాగ్లెస్ డేస్ని ఒక క్రమపద్ధతిలో అమలు చేసే కార్యకలాపాలను కవర్ చేస్తుంది.
DOWNLOAD :
# Activities for 10 Bagless Days